If you want to revamp your kitchen without spending much, then you should paint cabinets all by yourself. To complete the job perfectly, go for water-based paints like acrylic urethanes and acrylic alkyds. These can be cleaned with water and the smell would just be within the room. For better results, it’s recommended to use mini rollers and high-quality sprayers. So, when you’re ready, you should scroll down and skim through numerous tips.
- Protect Countertops
- Remove hardware & drawers
- Label Doors
- Wipe off grease
- Sand Cabinets
- Use a fast-dry primer
- Make surfaces even
You are bound to create a mess when you start painting kitchen cabinets. The best way to protect countertops or the floor is to cover it up with rosin or brown builder’s paper. Generally, you can procure a size measuring 35 inches x 140 feet. Later, once you’re done, you can use the leftover for future projects. At that instance, you would actually be saving time rushing to the local outlets.
In many apartments, you may see paint on hardware and along drawer interiors. So, for a clean look, you should remove hardware and then apply the paint. In several contemporary designs, drawers can be easily removed by loosening the screws. But, if that’s not the case, then use a masking tape to shield drawers temporarily. Make sure that the sides and bottom is protected properly.
Well before time, sketch the layout on a piece of paper. The picture should represent doors and drawers. Afterwards, label the doors and note down numbers in a sequential manner. Preferably, choose a location just below the hinges. Cover the digits completely and protect them till you finish painting. For labels, you can use a marker or a pen of your choice.
Mopping off grease should be the first step before painting. You can either use a dishwashing agent or a gear-cutting solution. As an alternative, TSP substitutes would also work. Mix the solutions, scrub cabinets and finally rinse them with water. To clear moisture and droplets, finish off with a clean rag.
To make surfaces smooth and even, you should always sand cabinets. If you have bought branded cabinets, then sand them with 120-grit sandpaper. If the surface is rough, then 100-grit paper would do the magic. Once you have removed bumps, you should use 120-grit for removing marks.
After the first coat, use a fast-dry primer if you need to speed up. Refer to the packaging and ensure that the primer works for the paint you’ve applied. Always use an enamel underbody primer. But, for a perfect finish oil-based primers too can play a role.
Some types of wood like oak have open pores. It’s perfectly fine if grains are visible, but you must fill the pores for the grain-free look. Several coats of a primer can help you solve the problem. While spackling also helps, it’s tough to use when cabinets are designed artistically. Once the filler dries, put in efforts to sand wood. After you prime, mix and match kitchen cabinet paint colors for an awesome effect.
Finally, use the right type of paint and brush. Ideally, you should buy a 2 inch brush and a can of conditioned paint. You would realize the result and effect once you have wound up.